This is the base for the middle houses in a row of low relief terrace houses (rear). It is designed to work with 008-000, 008-001 and 008-002. Railwayside Terrace houses are designed to be installed left to right. This base features entrances on the rear wall that are positioned centrally. The entrances can be detailed with any of our gate door products in the Building Accessories Series (006), the gate doors for this product are size 001.
This base is designed to connect to another middle / center base (eg. 008-004 or 008-005) or an end base (eg. 008-003 or 008-006). We recommend using blue tack or tacky wax to assemble the components after 3D printing before gluing them in place.
Approximate Dimensions (vary depending on print settings): 88x129x32 mm
Print time (at 30mm/sec): 5 hours, 01 minutes
Recommended Material: PLA
Material Usage: 21.97m (~66g)
Print considerations: This product should be printed with support material enabled. A minimum of 30% in-fill is recommended and default PLA heated bed settings to prevent warping of the base. A print layer resolution of 0.3mm is sufficient for this print.