This 3D model produces an LNER style ballast or chip bin. These ballast bins were seen along the lineside throughout the rail network. For best results we recommend printing at the highest possible resolution your 3D printer can handle, we typically use 0.1mm line height as the quality is improve, the print time and material usage over lower settings is negligible compared to the results.
Print Dimensions (vary depending on print settings): 24x18.7x10mm
Print time (at 30mm/sec): 27 minutes
Recommended Material: PLA
Material Usage: 0.70m (~2g)
Print Considerations: Disable support material, build plate adhesion is optional (we use skirt or brim depending on the printer). For this model we recommend between 50% and 100% fill. For best results we recommend a 100% fill rate.