T3D-008-002 Railwayside Terrace - Low Relief House (Rear) 6 rooms

Trackside 3D SKU: T3D-008-002

$5.99 USD

Available Now!

This 3D model produces the back of a low relief terraced house. The printed model can be used by itself or combined with our series of bases to create rows of terraced houses. This version of the model has six interior rooms on each side (12 in total). This product is designed to be used with our Trackside 3D Mix n Match building details. The door, window and chimney stacks from out Building Accessories series (006) can be mixed and matched with this product to create a unique look. An optional rear wall for mounting and running wiring is also available.

 

Windows: This product has three styles of window openings:

Quantity  Window Size Trackside 3D Product
4 000 (12x16x1) 006-009
4 001 (10x16x1) 006-010
2 001 (8x16x1) 006-011

 

Doors: This product uses Trackside 3D doors sized 000, products such as 006-007 will fit this product.

Chimneys: This product uses two types of chimneys. The central chimney stack uses size 004. The chimney on the left is wider than the one on the right to enable creating rows of houses. When connecting houses together, use chimney stacks size 003 which come with stack clips. The left hand chimney stack uses size 001 when it is the first house in a row. The right hand chimney stack uses size 002 when it is the last house in a row.

Creating rows of terraced houses: This product is designed to be very flexible. When creating a row of houses, start from left to right. The houses can be used stand alone or with our bases. For easier installation, wiring for lights and to complete the look of the building, we offer a rear wall / rear mounting plate as 008-007. We have also have four bases available:

Product Installation Description
008-003 Left (first house in row) Base with walls, side and rear entrances
008-004 Middle Base with walls, rear entrances are offset
008-005 Middle Base with walls, rear entrances are centered
008-006 Right (last house in row)

Base with walls, rear entrances

 

Approximate Dimensions (vary based on print settings): 51.2 x 128 x 108.5 mm

Print time (at 30mm/sec): 13 hours, 08 minutes

Recommended Material: PLA

Material Usage: 51.77m (~154g)

  1. Trackside3D Large Object Profile
  2. Support Material Enabled (adjust XY distance and Z distance as needed)
  3. Build plate adhesion - brim
  4. Infill >= 60%
  5. Layer height = 0.15mm - 0.2mm

Print considerations: This product must be printed with support material, care must be taken when removing support material from around window and door openings to prevent damage. 

Finishing: This product can be painted or wrapped with texture sheets for the desired look and feel.